Table of Contents
Advertisement
Margins and the Distance between Crop Marks
Set the margins and the distance between crop marks. Take into account the margin necessary for cutting
the material and set the crop mark position.
Printing Area with Crop Marks (When Creating Cut Data Using CutStudio)
MEMO
Ensure that the area where the crop marks are positioned is free of any illustrations or dirt other than the crop marks.
Length (L) between crop marks
Width (W) between crop marks
Printable area
A
500 mm (19.68 in.) or less
B
610 mm or less
C
10 to 60 mm (0.40 to 2.36 in.)
D
10 to 42.5 mm (0.40 to 1.67 in.)
E
50 mm (1.97 in.) or more
F
20 mm (0.8 in.)
*1
Set the crop mark positions manually. Note the following points when using material in sizes other than A3, A4, or B4.
• When using a pinch roller within the leftmost grit pattern, make sure to leave at least 30 mm (1.19 in.) (W) from the left
end of the grit pattern to the crop mark. If the cleared distance is less than 30 mm (1.19 in.), the crop mark cannot be
read.
*1
329
Main Specifications
Advertisement
Table of Contents
