Step 3: Output The Print & Cut Data - Roland VersaSTUDIO GS2-24 User Manual

Step 3: Output the Print & Cut Data
1. Print the Print & Cut Data
Send the print data to the printer, and print the Print & Cut data.
Procedure
1.
Load the material in the printer.
For how to load material in the printer, refer to the printer's documentation.
IMPORTANT
When expanded/reduced printing is enabled, disable it. Make sure to print at 100% scale.
2.
Hide the layer containing the cutting lines.
3.
Click [File]>[Print].
4.
Check the Printing Setup, and click [Print].
Only the print data will be printed.
Printing and Cutting Method
Creating Cut Data Using Adobe Illustrator (Mac)
127