Saving Frequently-used Cutting Conditions
Loading Cutting Conditions
Select a saved memory, and apply that to the operation panel.
You can select a memory from USER 1 to USER 8. Note that loading cutting conditions from memory erases
any cutting conditions that have not been saved.
Procedure
1.
Press [MENU] several times to display the following screen.
CONDITION
MEMO
When the material is loaded, press [MENU] several times to display the following screen.
UNSETUP
2.
Press [▼] several times to display the following screen.
MEMORY
<USER1>
3.
Press [▶] twice.
LOAD *USER1
50-20-0.250
4.
Press [▲][▼] to select the memory number you wish to load.
5.
Press [ENTER] to execute.
6.
Press [MENU] to return to the original screen.
226
Optimizing Work Efficiency