Step 3: Setting The Alignment Method (Manual Mode) - Roland VersaSTUDIO GS2-24 User Manual

Print & Cut in Manual Mode

Step 3: Setting the Alignment Method (Manual Mode)

1. Select Manual Mode
Set the crop mark aligning method to Manual Mode.
Procedure
1.
Press [MENU] several times to display the following screen.
UNSETUP
2.
Press [▼] several times to display the following screen.
CROPMARK
<SENSOR MODE>
3.
Press [▶].
CROPMARK
SENSOR MODE
4.
Press [▲][▼], and select "MANUAL".
CROPMARK
MANUAL
5.
Press [ENTER].
CROPMARK
<MANUAL>
6.
Press [▶].
186
Other Cutting