Preparations For Cutting Output; Step 1: Prepare The Blade - Roland VersaSTUDIO GS2-24 User Manual

Preparations for Cutting Output

Step 1: Prepare the Blade

CAUTION
Never touch the tip of the knife.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
Required items (included items)
Blade Holder
*1 The pin is inserted into the holder.
Procedure
1.
If the pin has been removed from the blade holder, insert the pin into the blade holder.
2.
Turn the blade holder cap clockwise, and tighten it until it stops rotating.
3.
Insert the blade.
40
Basic Operation
Blade
Pin
*1