Step 2: Setting The Cutting Conditions - Roland VersaSTUDIO GS2-24 User Manual

Step 2: Setting the Cutting Conditions

Procedure
1.
Check that the material has been properly loaded and set up.
P. 26Setting Up Material
2.
In the [Roland CutStudio] panel, select [GS2-24] under [MODEL].
3.
In the panel, click [Update Information].
The cuttable range is acquired from the connected machine, and the display on[Media] will be up-
dated.
MEMO
If [The machine is not responding.] is displayed, check the settings on this machine and the computer.
P. 291The Machine Doesn't Run
4.
Click on the palette, and then click [Preferences].
5.
Select the [Use Cut Setting] check box.
Creating Cut Data Using Adobe Illustrator (Mac)
Cutting Method
119