Cutting the Same Data Repetitively
Step 2: Recutting
Procedure
1.
Press [MENU] several times to display the following screen.
UNSETUP
2.
Press [▼] several times to display the following screen.
REPLOT
<DATA EXISTS>
3.
Press [▶].
REPLOT
*START
4.
Press [ENTER].
The display goes back to the one shown below, and the cutting, which has been saved in the mem-
ory, is performed.
20cm/s
250gf 0.250mm
224
Optimizing Work Efficiency
A