Cutting Multiple Sets Of The Same Cutting Data; Duplicating Cutting Data With The Aas Plug-In; Duplicating Cutting Data With The Greatcut-R Plug-In - Roland Camm-1 GR2-640 User Manual

Cutting Multiple Sets of the Same Cutting Data

Create multiple sets of cutting data by duplicating cutting data for printing and cutting or for cutting
only.

Duplicating Cutting Data with the AAS Plug-in

Use the AAS plug-in to create duplicate data for printing and cutting and send cutting jobs to the
printer driver.
Procedure
1.
Start Adobe Illustrator or CorelDRAW.
2.
Click [File]>[Open] to select cutting data that includes cutting lines.
3.
Set multiple copies of crop marks in the cutting data.
P. 64 "Setting Crop Marks with the AAS Plug-in (Adobe Illustrator)"
P. 66 "Setting Crop Marks with the AAS Plug-in (CorelDRAW)"
4.
Print all of the duplicated data to the material using your printer.
P. 71 "Printing Cutting Data on Material"
5.
Load the material in the machine.
P. 21 "Loading the Material"
6.
Set the cutting start position (origin).
P. 48 "Setting the Output-start Location"
P. 73 "Setting the Output-start Location (Printing and Cutting)"
7.
Send the cutting job to the machine.
P. 49 "Sending Adobe Illustrator Cutting Jobs from the Printer Driver"
P. 52 "Sending CorelDRAW Cutting Jobs from the Printer Driver"

Duplicating Cutting Data with the GreatCut-R Plug-in

Create printing data by duplicating the cutting data that includes cutting lines in the direction speci-
fied using GreatCut-R, and set up the cutting.
Procedure
1.
Start Adobe Illustrator or CorelDRAW.
2.
Click [File]>[Open] to select cutting data that includes cutting lines.
3.
For printing and cutting, duplicate cutting data with crop marks set up and print it on the material.
(1)
Set the four-point crop marks.
P. 68 "Setting Crop Marks with the GreatCut-R Plug-in (Adobe Illustrator/CorelDRAW)"
(2)
Select cutting data that includes crop marks.
(3)
Open the [Multi-Copy] window and enter the number of duplications and the distance between
data sets in the X and Y directions, respectively.
• Adobe Illustrator: Click [File]>[GreatCut-R]>[Multi-Copy].
• CorelDRAW: Click
If you want to duplicate the cutting data using the distance starting from the origin in the
original data (bottom left), select [Distance] from the pull-down list.
90
Other Cutting
displayed on the menu bar.