Table of Contents
Advertisement
Step 4: Setting the Output-start Location
Before cutting, set the output-start location to a location where adequate cutting area can be secured.
Output the actual cutting to an area that does not overlap with the area used for cutting tests.
Procedure
1.
Press [◀][▲] to move the cutting carriage to the location you want to set as the origin.
Move the cutting carriage until the blade tip points to the location you want to set as the origin.
2.
Press [▲] to move the material backward, and ensure that the cutting test traces are in front of the
blade protector.
The blade moves over the blade protector. When the origin is set, the area behind the blade pro-
tector is set as the cutting area.
3.
Hold down [ORIGIN] for one second or longer.
The display flashes, and the location of the blade tip is set as the origin.
Preparations for Cutting Output
Basic Operation
47
Advertisement
Table of Contents
