Unloading/Cutting Off Material; Removing The Material - Roland VersaSTUDIO GS2-24 User Manual

Unloading/Cutting Off Material

After outputting, unload or cut off the material from the machine.

Removing the Material

When cutting is finished, remove the material.
Procedure
1.
Press [MENU] several times to display the following screen.
UNSETUP
2.
Press [ENTER].
The cutting carriage returns to the home position.
3.
Lower the loading lever.
IMPORTANT
Do not use excessive force when moving the loading lever.
Doing so may damage it.
4.
Remove the material.
168
Procedures after Output