Step 2: Set The Tiled Output Conditions - Roland VersaSTUDIO GS2-24 User Manual

Dividing Cut Data and Outputting it on Multiple Pieces of Material

Step 2: Set the Tiled Output Conditions

Set enable or disable tiled output and inner margins.
Load material to the machine beforehand, and finish preparing the cut output.
P. 26Setting Up Material
P. 40Preparations for Cutting Output
Procedure
1.
Start CutStudio.
Starting CutStudio
2.
Click [File]>[Tiling].
The [Tiling] window is displayed.
3.
Click [Change Size].
256
Optimizing Work Efficiency