Connecting More Than One Machine To One Computer (Windows); Connecting Via A Usb Cable - Roland VersaSTUDIO GS2-24 User Manual

Connecting More Than One Machine to One
Computer (Windows)

Connecting via a USB Cable

You can connect up to five GS2-24 units to a single computer. When connecting multiple GS2-24 units via
USB connection, you must change the USB number of each machine so that the output destinations can be
distinguished. The machine's default setting is "A". When connecting two or more machines, the second
machine and every machine thereafter must be configured with a setting other than "A" so that the ma-
chine can distinguish the output destination of the data.
Perform Steps 1 to 3 to set up a connection. The same procedure can be used to connect a third or subse-
quent unit.
Step 1: Change the USB Number of the Machine
IMPORTANT
Do not connect the machine to the computer using the USB cable yet. Doing so may interfere with correctly applying
the settings.
Procedure
1.
Turn off the power of the machine.
2.
Press [TEST] and the power button at the same time.
The screen shown below appears.
USB NUMBER [A]
*A
3.
Press [▲] and [▼] to select a setting other than "A".
It is possible to select a value from "B" to "E". In this example, "B" is selected.
4.
Press [ENTER].
5.
Turn the power off and then on again.
The screen shown below appears. Check that the letter you set in step 3 is displayed.
Roland GS2-24
[B] Main:V***
294
Machine Problems