Table of Contents
Advertisement
Printing and Cutting Method
Step 1: Create Print & Cut Data
1. Place the Print Data
MEMO
CutStudio can read the following file types only.
• JPEG format (JPEG files saved in CMYK format cannot be read.)
• PNG format
• BMP format
• AI and EPS formats (Illustrator 8.0 version only. If using a higher version, lower the version when saving.)
Procedure
1.
Start CutStudio.
P. 14Starting CutStudio
2.
Select [File]>[Print&Cut] on CutStudio.
The printing area and crop marks are displayed on the screen. The printing area is displayed with
dotted lines. Crop marks will be displayed in the area where margins specified in [Printing Setup]
are excluded from the material size specified in [Set up the printer].
3.
Click
to import print data.
Here, Sample.bmp found in the folder where CutStudio is installed (normally located in the [Pro-
gram Files (x86)]>[CutStudio] folder on the C drive) is opened as print data.
60
Creating Cut Data Using CutStudio
Advertisement
Table of Contents
