Step 6: Performing Cutting - Roland VersaSTUDIO GS2-24 User Manual

Step 6: Performing Cutting

Send the data to the machine, and start cutting the material.
WARNING
Never touch the cutting carriage while output is in progress.
The cutting carriage moves at high speed. Coming into contact with the moving carriage may cause injury.
Procedure
1.
Show the layer containing the cutting lines and select it.
Confirm that the cutting line to output is displayed on the preview screen.
2.
Select [Output Current Layer].
Confirm that the cutting line to output is displayed on the preview screen.
MEMO
Do not change [Rotate] from
To change or check the cut setting, refer to
3.
On the palette, click
4.
Select [Roland GS2-24], and click [Cut].
.
Step 2: Setting the Cutting
.
Printing and Cutting Method
Conditions.
Creating Cut Data Using Adobe Illustrator (Mac)
135