Table of Contents
Advertisement
Consumable Parts
To purchase consumable items, visit the DGSHAPE Corporation website or contact your authorized
DGSHAPE Corporation dealer.
RELATED LINKS
・ https://www.rolanddg.com/
Blade
Blade
In the cases below, the blade has reached the end of its service life. Replace it with a new item.
• The tip of the blade is broken.
• Uncut areas remain even though the blade force has been increased to 50 to 60 gf.
• Cuts are not as clean as they used to be
• The material starts to curl up from the carrier paper when cutting detailed areas or corners
The tip of a blade that has been used for a long time or has been used to cut hard material may wear
away. A blade that has worn in this manner will no longer cut cleanly, so replace it with a new one.
RELATED LINKS
・
P. 276Replacing the Blade
Replacing the Blade
If the blade becomes dull, replace it with the included replacement blade.
WARNING
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury or burns.
CAUTION
Never touch the tip of the knife.
Doing so may result in injury. The cutting performance of the blade will also be impaired.
Procedure
1.
Remove any material loaded in the machine.
2.
Detach the blade holder.
276
Cleaning and Consumable Parts
Advertisement
Table of Contents
