Managing The Basic Settings Of The Machine; Changing The Display Language; Changing The Unit Of Length To Be Displayed - Roland VersaSTUDIO GS2-24 User Manual

Managing the Basic Settings of the Machine

Changing the Display Language

Procedure
1.
When the machine power is on, press the power button for 1 second or longer to turn off the power.
2.
Hold down [MENU] and press the power button.
The screen shown below appears.
LANG. ENGLISH
*ENGLISH
3.
Press [▼] to select the language to show on the display.
LANG ENGLISH
にほんこﾞ
4.
Press [ENTER] to select the setting.

Changing the Unit of Length to Be Displayed

Change the unit that is used for the display.
Procedure
1.
Press [MENU] several times to display the following screen.
CONDITION
MEMO
When the material is loaded, press [MENU] several times to display the following screen.
UNSETUP
2.
Press [▼] several times to display the following screen.
OTHERS
3.
Press [▶], [▼], then [▶].
UNIT mm
*mm
4.
Select the unit with [▲][▼].
It is possible to select millimeters or inches.
Optimizing Operation Management
267