Cutting Method
Step 2: Output the Cut Data to CutStudio
Send the cut data created on CorelDRAW to CutStudio.
Procedure
1.
Select [Output All Lines] on the [Roland CutStudio] palette.
2.
Select the [Auto Update] check box.
Confirm that the cutting line to output is displayed on the preview screen.
3.
Click
CutStudio starts, and the cutting line data is sent to CutStudio.
MEMO
The output data is always aligned at the origin of CutStudio regardless of the position on CorelDRAW.
140
Creating Cut Data Using CorelDRAW
.