Crop Marks/Tool Marks
Crop Marks
Crop marks are used for alignment when cutting the material, which is printed from your printer, on this
machine. Having the machine remember the positions of the crop marks, which are printed together with
the image, makes it possible to correct cutting positions.
Readable Crop Marks
The sensor of the machine is only able to read crop marks like the circle shown below.
• Diameter: 10 mm
• Color: Black
MEMO
The machine may not be able to read printed crop marks correctly depending on the printer ink used.
When to Use Crop Marks [3] vs[4]
Normally use [4]. As [3] has fewer crop marks to be read than [4], the time required for cutting is re-
duced. However, Tool Mode is unavailable with [3].
RELATED LINKS
・
P. 329Margins and the Distance between Crop Marks
16
Basic Information