Step 2: Create Print & Cut Data - Roland VersaSTUDIO GS2-24 User Manual

Step 2: Create Print & Cut Data
1. Place the Print Data
Procedure
1.
Click [File]>[Import] to import print data.
Here, Sample.bmp found in the folder where CutStudio is installed (normally located in the [Pro-
gram Files (x86)]>[CutStudio] folder on the C drive) is opened as print data.
2.
Select the print data, and click [Import].
3.
Position the print data in the area within crop marks.
Printing and Cutting Method
Creating Cut Data Using CorelDRAW
151