Table of Contents
Advertisement
Setting Up Material
Loading Position of Material
Load the material so the left and right margins from the edges of the material to the pinch rollers are uni-
form. Load the material so the pinch roller (W) is within the range (Y) of the grit pattern (X).
MEMO
Depending on the width of the material to load, the left and right margins may not be uniform, and the margin on the
right edge of the material may be larger than the margin on the left edge.
Z
Usage position of left pinch roller
Usage range of the left pinch roller
When loading material for which the width is other than A to D, move the left pinch roller.
Right pinch roller usage range with A material loaded
Right pinch roller usage range with B material loaded
Right pinch roller usage range with C material loaded
Right pinch roller usage range with D material loaded
A
Material with a width of approximately 150 mm (5.91 in.)
B
Material with a width of approximately 306 mm (12.05 in.)
C
Material with a width of approximately 457 mm (17.99 in.)
D
Material with a width of approximately 610 mm (24.02 in.)
When loading material other than those described above, change the position of the left pinch roller to
match the width of the material.
26
Basic Operation
Advertisement
Table of Contents
