Table of Contents
Advertisement
Setting the Blade Tip Offset Amount
This setting lets you set the offset for the tip of the blade. Enter the listed offset value for the blade.
When using the included blade, cutting can be performed using the factory-default settings.
MEMO
If the beginning of a cut deviates from the intended location or if the corners of a shape are not clean, adjust the off-
set value.
Procedure
1.
Press [MENU] several times to display the following screen.
CONDITION
MEMO
When the material is loaded, follow the following procedure to display the screen.
1. Press [MENU] several times to display the following screen.
UNSETUP
2. Press [▼].
2.
Press [▶].
3.
Press [▲][▼] to display the following screen.
OFFSET 0.250mm
4.
Press [▶].
5.
Press [▲] or [▼] to select a value.
OFFSET 0.250mm
0.500mm
6.
Press [ENTER] to select the setting.
7.
Press [MENU] to return to the original screen.
MEMO
• Factory default setting: 0.250 mm
• Setting range: 0.000 to 1.000 mm (0.000 to 0.039 in.) (in 0.025 mm (in 0.001 in.) steps)
RELATED LINKS
・
P. 196General Guide Regarding Cutting Conditions
Adjusting the Cut Setting
Optimizing Cutting Quality
201
Advertisement
Table of Contents
