Creating Perforated Cut Data Using Adobe Illustrator
1. Create Perforated Cut Data
Load material to the machine beforehand, and finish preparing the cut output.
P. 26Setting Up Material
P. 40Preparations for Cutting Output
This section shows an example of creating perforated cut data using Adobe Illustrator 2020. The operation
procedure is the same for other versions.
Procedure
1.
Create a new document and draw a new shape or open an existing file.
In this example, you will create the design shown in the figure below.
2.
Click [Window]>[Extensions]>[Roland CutStudio].
The [Roland CutStudio] palette appears.
Separating the Cut Area Later
Optimizing Work Efficiency
235