Table of Contents
Advertisement
Part Names and Functions
Cutting Machine Main Unit
Front
No.
Loading lever
Left pinch roller
Cutting carriage
Right pinch roller
Grit roller
Grit pattern
Blade protector
Guide line
Knife guide
Operation panel
Name
Use this when loading material.
Lift up the loading lever and then pinch the material with this. Set this
at the left edge of the material.
Install the blade holder. This part moves to the left and right to cut the
material.
Lift up the loading lever and then pinch the material with this. Set this
at the right edge of the material.
This roller feeds out the material to the front or rear.
These indicate the locations of the grit rollers. When loading the mate-
rial, be sure to place the pinch rollers within the area indicated by
each of these patterns.
This protects the tip of the blade during cutting.
This is a guide for aligning the material when loading.
By inserting a blade, etc. and moving it along the guide, the material
can be cut out without being unloaded.
You use this to perform various operations.
Functional overview
Basic Information
9
Advertisement
Table of Contents
