Connecting Via Ethernet - Roland VersaSTUDIO GS2-24 User Manual

Connecting via Ethernet

You can connect up to five GS2-24 units to a single computer. When connecting multiple machines to one
computer using Ethernet, install a driver as you add each machine.
Perform Steps 1 to 3 to set up a connection. The same procedure can be used to connect a third or subse-
quent unit.
Step 1: Installing the Driver of the Machine to Be Added
Procedure
1.
Connect the machine to be added to the same LAN as the computer using an Ethernet cable.
2.
Install the driver on the computer.
Refer to "Installing the Software with the IP Address Set Automatically" in the "Installation and Ini-
tial Settings Windows Version" manual (https://downloadcenter.rolanddg.com/GS2-24), and install
the driver on the computer.
Connecting More Than One Machine to One Computer (Windows)
297
Machine Problems