Table of Contents
Advertisement
Specifications
Drive system
Cutting mechanism
Acceptable material size Width
Length
Maximum cutting area
Usable tools
Cutting speed
Blade force setting range
Mechanical resolution
Software resolution
*1
Distance accuracy
*1*2
Repetition accuracy
Alignment accuracy for printing and cutting when
*1 *3
printed material is loaded
Connectivity
Replot memory
Command system
Power supply
Rated current
Power consumption
Acoustic noise level
During operation
During standby
Outer dimensions
Weight
Environment
Included items
*1
According to material and cutting conditions as specified by Roland DG Corporation (using separately available stand PNS-24).
*2
• Excluding expansion/contraction of the media
• Provided that the media feed length is 1,600 mm (62.99 in.) or less
*3
According to measurement standards as specified by Roland DG Corporation.
• Software must be included Roland DG Corporation software.
• Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
• Excludes glossy and/or laminated material.
• Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
• May not be read correctly by the sensor depending on the printer ink (black) used.
Digital control servo motor
Friction feed
50 to 700 mm (1.97 to 27.55 in.)
Roll material: No restriction
Flat material: 100 mm (3.94 in.) or more
584 (W) × 25,000 (L) mm (22.99 [W] × 984.25 [L] in.)
• Roland CAMM-1 series blade (ZEC-U5032/U5022/U5025/U3017)
• Flatbed blade (ZEC-U1715/U3050/U3075/U3100)
• Car film dedicated blade (ZEC-U5010)
10 to 850 mm/s (0.4 to 33.46 in./s) (all directions)
30 to 500 gf
0.0125 mm/step
0.025 mm/step (0.98 mil/step)
Error of less than ±0.2% of distance traveled, or 0.1 mm (3.94 mil), whichever
is greater
0.1 mm (3.9 mil) or less
1 mm (39.37 mil) or less for movement distance of 210 mm (8.26 in.) or less in
material-feed direction and movement distance of 170 mm (6.69 in.) or less in
width direction (Does not take influence of printer and material into account)
• Ethernet (10BASE-T/100BASE-TX, automatic switching)
• USB (USB 2.0 FULL SPEED compliant)
2 MB
CAMM-GLIII
Dedicated AC adapter
Input: 100 to 240 VAC, 50/60 Hz
Output: 24 VDC 2.7 A
1.0 A
24 W
70 dB (A) or less
40 dB (A) or less
860 (W) × 319 (D) × 235 (H) mm (33.86 [W] × 12.56 [D] × 9.25 [H] in.)
13.5 kg (29.76 lb.)
• Temperature: 5 to 40°C (41 to 104°F)
• Humidity: 20 to 80%RH (no condensation)
Power cord, AC adapter, blade, blade holder, roller base, USB cable, align-
ment tool, manuals
333
Main Specifications
Advertisement
Table of Contents
