Adjusting the Cut Setting
Set the Orientation of Cutting Coordinates
Rotate the cutting coordinates, and decide which direction to cut the material.
Procedure
1.
Press [MENU] several times to display the following screen.
CONDITION
MEMO
When the material is loaded, follow the following procedure to display the screen.
1. Press [MENU] several times to display the following screen.
UNSETUP
2. Press [▼].
2.
Press [▶].
3.
Press [▲][▼] to display the following screen.
ROTATE 0deg A
4.
Press [▶].
5.
Press [▲] or [▼] to select a setting.
ROTATE 0deg A
*0deg A
"0deg"
202
Optimizing Cutting Quality
The arrows in the following figures indicate the positive di-
rections of the X and Y axes respectively.
• Origin point: Bottom left
• Coordinate axis:
Vertical direction: Y axis
Horizontal direction: X axis