Creating Cut Data Using Coreldraw - Roland VersaSTUDIO GS2-24 User Manual

Creating Cut Data Using Cor-
elDRAW
Cutting Method ....................................................................................... 138
Step 1: Creating Cutting Data ............................................................... 138
Step 2: Output the Cut Data to CutStudio................................................. 140
Step 3: Setting the Cutting Conditions..................................................... 142
Step 4: Cutting................................................................................. 146
Checking CorelDRAW Help .................................................................... 147
Printing and Cutting Method ........................................................................ 148
Step 1: Set the Printing Conditions ......................................................... 148
Step 2: Create Print & Cut Data............................................................. 151
Step 3: Output the Print & Cut Data ....................................................... 154
Step 4: Configure the Setting to Perform Automatic Aligning.......................... 159
Step 5: Send Print & Cut Data to CutStudio ............................................... 160
Step 6: Setting the Cutting Conditions..................................................... 161
Step 7: Cutting................................................................................. 165

Creating Cut Data Using CorelDRAW

137