Paper Take-Up Section; Cleaning And Replacement Of The Paper Take-Up Roll, Feed Roll, Separator Roll, And Paper Dust Remover - Minolta CF910 Service Manual

2-4.

PAPER TAKE-UP SECTION

(1) Cleaning and Replacement of the Paper Take-Up Roll, Feed Roll,
Separator Roll, and Paper Dust Remover
5. Paper Take-Up Clutch
Loosen set
1154D129AC
screws. ×2
4. Paper Take-Up Roll
Assy ×3
Fig. 2, 3
3. Guide Plate ×3
2. Guide Plate Assy ×3
Fig. 1
Fig. 3
Torsion Spring installed position
Fig. 4
6. Paper Dust Remover Assy
Fig. 4
1144D067AA
D-19
1144D250AA
Vertical Transport
Rollers ×3
Clean.
Paper Take-Up Roll Assy installed position:
The Paper Take-Up Roll shaft is on the
lever.
Paper Dust Remover
Clean/replace.
Note:
Align the edge with
the guide plate end
face at replacement.
Transport Rollers
Clean.
1. Slide out the
drawer and
Remove the
Paper Take-
Up Unit.
1154D130AB
1144D068AA