Transfer Film Cleaning Mechanism; Oil Cleaning - Minolta CF910 Service Manual

1154SBM1605A

16-5. Transfer Film Cleaning Mechanism

• The Transfer Film cleaning mechanism removes toner and fusing oil from, and neutral-
izes any residual charge on, the surface of the Transfer Film.
• Transfer Film cleaning can occur in any of the following three patterns.
During predrive
After a copy cycle
Copy Mode
At the end of Mono
1-sided copy Color
cycle
Full
Color
At the end of
Mono
2-sided or
Color
manual bypass
copy cycle
Full
Color
When one When two
sheet is sheets are
attracted attracted
After 48 After 96
copies copies
After 24 After 48
copies copies
After 12 After 24
copies (24 copies (48
copy cycles) copy cycles)
After 6 After 12
copies (12 copies (24
copy cycles) copy cycles)
M-104
Cleaning Mode
• Toner cleaning • Fur Brush Unit
• Charge
• Toner cleaning • Fur Brush Unit

• Oil cleaning

• Oil Collecting
(2-sided copy
cycle and Multi
Bypass copying
for paper other
than OHP
transparencies)
• Charge
Cleaning Mode
• Toner cleaning • Fur Brush Unit
• Charge
• Toner cleaning • Fur Brush Unit
• Oil cleaning • Oil Collecting
• Charge
Means
neutralizing
Roller (2-sided
copy cycle and
Multi Bypass
copying for
paper other
than OHP
transparencies)
neutralizing
Means
neutralizing
Roller
neutralizing