Minolta CF910 Service Manual page 362

Developer Change Mode Menu
Touch Panel Display
After Dev. (C/M/Y/
Bk) has been
changed
ATDC Sensor
Adjust (Auto)
AIDC Sensor
Adjust (Auto)
AIDC Offset
Black ATDC
Adjust
After Dev. (C/M/Y/
Bk) has been
changed
After Dev. (Bk) has
been changed
After PC Drum has
been changed
Mode Menu
Developer
AIDC
AIDC Sensor
Auto
Manual
AIDC Offset
ATDC Sensor
Auto
Manual
Black ATDC
Adjust
Each of the following functions is used to adjust the ATDC/AIDC.
Automatically adjusts the ATDC Sensors for C, M, and Y Developing
Units.
Automatically adjusts the AIDC Sensor.
Automatically adjusts the offset level of the AIDC Sensor.
Automatically adjusts the ATDC Sensor for the Bk Developing Unit.
Performs the ATDC Sensor Automatic Adjustment, AIDC Sensor
Automatic Adjustment, and AIDC Sensor Offset Level Automatic
Adjustment procedures.
Performs the AIDC Sensor Automatic Adjustment, AIDC Sensor Off-
set Level Automatic Adjustment, and Black ATDC Sensor Automatic
Adjustment procedures.
Performs the AIDC Sensor Automatic Adjustment and AIDC Sensor
Offset Level Automatic Adjustment procedures.
Either one of the above functions can be performed individually by
using the following functions.
Dumps old developer, and loads and agitates fresh developer.
Adjusts the AIDC Sensor.
Adjusts the AIDC Sensor either automatically or manually.
Automatically adjusts the AIDC Sensor.
Manually adjusts the AIDC Sensor.
Automatically adjusts the offset level of the AIDC Sensor.
Adjusts the ATDC Sensors.
Automatically adjusts the ATDC Sensors.
Manually adjusts the ATDC Sensors.
Automatically adjusts the ATDC Sensor for the Bk Developing Unit.
Setting
S-49