Minolta CF910 Service Manual page 293

8. Assemble the Developer Collecting Bag. Using two clips, secure the bag to the Devel-
oping Unit (Fig. 1).
9. Remove the ATDC assy from the Developing Unit or Units to be discharged (Fig. 2).
10. Pull the Bag up over the front end and clip it with two more clips (Fig. 3).
Fig. 1
Developer
Collecting
Bag
1144D328AA
Fig. 2
Note:
Use care not to
damage the lower
edge of the vinyl
bag (Developer
Collecting Bag)
when putting the
inner box into it.
Fig. 3
1154D205AA
11. Touch "On" for the color or colors to be
discharged (1 to 4).
12. Press the Start Key to discharge the
developer.
(It takes about 5 min. to discharge all 4
developers.)
13. After these steps have been completed,
touch "Ex." to select Developer Filling.
1154D114CA
D-132
Clip ×2
1144D323AA
1154D204AA
Clip ×2