Minolta CF910 Service Manual page 200

Fig. 2
Disassembly/reassembly of the Oil Collecting Blade Assy
Oil Collecting Blade ×2
Clean/replace.
Retaining Plate
Note :
At installation, ensure that the face of the blade marked with "WORKING EDGE" is on
the Fusing Roller side. Make also sure that the blade is properly on the dowels.
Note
4. Oil Filter
Replace.
3. Oil Filter Mounting
1. Cover
D-39
Holding Plate
1154D146AA
2. Oil Collecting Blade
1154D147AB