Minolta CF910 Service Manual page 490

print through the X-Rite from the front so it can read
the Black data.
10. Transmit the correction values to CF911P.
Switch the Switcher to the "A" CF911P position.
(If the switch position is not changed, the PC screen
shows "_".) Click the Exit button.
Data is then transferred to the printer, showing the
message "Cyan Copying, ...." on the screen.
At this time, the cyan gray scale pattern is printed to
initialize CF911P.
11. This completes the color adjustment procedures.
Repeating these adjustment procedures 3 times will
allow the colors to saturate.
To make readjustments, click the Start (RETURN)
button to go back to step 4.
Wait for CF911P to reply and repeat the adjustment
procedures.
Click the EX button to exit from the adjustment.
D-137-3
-16-