Minolta CF910 Service Manual page 347

Service Mode Menu
Touch Panel Display
Switch 2 (Option)
Switch 3 (Others)
State Confirm
Use this function to check the states of sensors of the options.
Sorter
Set Sorter Set Switch (S3)
Duplex
Set Duplex Unit Set Switch (S1)
Pap. Through
1 Vertical Transport Sensor (PC3)
2 Switchback Sensor (PC1)
3 Horizontal Transport Sensor (PC24): PPC
LCT
Set LCT CN
Path Set LCT Set Detecting Sensor (PC6)
Cover Open LCT Door Open/Close Detecting Sensor (PC7)
Pap. Empty Paper Empty Sensor (PC3)
Upr. Limit Paper Plate Upper Position Sensor (PC2)
Lwr. Limit Paper Plate Lower Position Sensor (PC4)
Pap. Trans Paper Take-Up Sensor (PC5)
Note
"On": Blocked "Off": Not Blocked
Use this function to check the states of sensors not covered by Switch
1 or 2.
C-T.Emp Toner Empty Switch
(C) S6
M-T.Emp Toner Empty Switch
(M) S7
Y-T.Emp Toner Empty Switch
(Y) S8
Bk-T.Emp Toner Empty Switch
(K) S5
IR Home Scanner Home Position
Sensor PC1
Org. Hold Size Reset Switch S12
Org. Hold Original Cover Angle
15 Detecting Sensor PC22
Rear Cover Predrive OFF Sensor PC23
T-Base Transfer Drum Reference
Position Sensor 1(PC20)
CH. Home Charge Cleaning Home
Position Sensor (PC16)
Note
"On": Blocked "Off": Not Blocked
Setting
CH.
Overrun
Used
Toner
Oil Empty
Org. Size 1
Org. Size 2
Org. Size 3
Org. Size 4
Org. Size 5
Org. Size 6
Org. Size 7
Org. Size 8
Org. Size 9
Org.
Size 10
S-34
Charge Cleaner Return Position
Sensor (PC17)
Toner Collectioning Box Full
Sensor (PC29)
Original Size Detecting Sensor 1 (SE3)
Original Size Detecting Sensor 2 (SE3)
Original Size Detecting Sensor 3 (SE3)
Original Size Detecting Sensor 4 (SE4)
Original Size Detecting Sensor 5 (SE4)
Original Size Detecting Sensor 6 (SE4)
Original Size Detecting Sensor 7 (SE2)
Original Size Detecting Sensor 8 (SE2)
Original Size Detecting Sensor 9 (SE2)
Original Size Detectiong Sensor 10
(SE 1)