(6) Adjustment of Oil Roller Solenoid
Adjusting Screw
Fig. 1 Oil Roller Solenoid Adjusting Procedure
Rubber
Ring
Oil Collecting Roller
Ratchet
Oil Roller Solenoid
1144D207AA
Roll
(front)
Flat Spring
Pawl
1154D256AA
D-110
Oil Roller Solenoid Assy
Fig. 1
1. Loosen the adjusting screws.
2. Manually move the solenoid into
the energized position and,
where the clearance between
the rubber ring of the Transfer
Drum and the front and rear roll
of the Oil Collecting Roller
becomes "0," secure the sole-
noid in position.
3. When the solenoid is manually
energized and deenergized, it
should click twice or more.
1154D255AA