Security Mode; Security Mode Screen; Security Mode Setting Procedure - Minolta CF910 Service Manual

6

SECURITY MODE

• This mode is used to set the counter and copy vender.
6-1.

Security Mode Screen

6-2.

Security Mode Setting Procedure

<Setting Procedure>
1. Show the Service Mode Menu on the Touch Panel and then press the following keys in
this order.
→
Stop key "9"
2.
3. Make the necessary settings by following the instructions given sequentially on the
screen.
Note:
The selected function is highlighted.
<Exiting the Mode>
Perform either one of the following steps to go back to the Basic screen.
• Press the Panel Reset key on the control panel.
• Touch [Ex] as many times as it is required to return to the Basic screen.
1154S024CA
S-45