Manual Take-Up Roll Pressure Mechanism - Minolta CF910 Service Manual

1154SBM1403A

14-3. Manual Take-Up Roll Pressure Mechanism

• The Manual Bypass Take-Up Roll is in the raised (standby) position at all times except
when it takes up a sheet of paper from the Multi Bypass Table. When the Start Key is
pressed, Manual Feed Paper Pick-Up Solenoid SL20 is operated to press the Manual
Bypass Take-Up Roll against the paper, enabling it to take up a sheet of paper.
• The Paper Stoppers block the leading edge of the paper stack placed on the Multi
Bypass Table. At paper take-up, the Lock Levers are moved to unlock the Paper Stop-
pers, thereby permitting paper take-up.
In Standby
• When SL20 is energized (UP side), the rack gear is pulled by the solenoid plunger and
the Manual Bypass Take-Up Roll is raised. At the same time, the lever moves to the left,
which causes the Lock Levers to lock the Paper Stoppers.
At Paper Take-Up
• When SL20 is energized (DOWN side), the rack gear is pushed by the solenoid plunger,
freeing the Manual Bypass Take-Up Roll. This makes the take-up roll press the paper.
At the same time, the lever moves to the right, unlocking the Paper Stoppers.
Lock Levers
Paper Stoppers
1144M061AA
M-83
Lever
Rack Gear
SL20: Energized (UP)
1144M060AA
SL20: Energized (DOWN)