Minolta CF910 Service Manual page 349

Service Mode Menu
Touch Panel Display
Bk Toner Sup. Sta-
tus
Temp. & Humidity Use this function to show the temperature and humidity inside the
CCD Check
Paper Passage
ROM Version
State Confirm
Use this function to show the parameters that determine the amount
of black toner to be replenished.
Dev.Bk Black Developing
Unit counter
Absolute Absolute humidity
Humidity
η(Bk120)
Developing effi-
ciency (at 120 mm/
sec.)
η(Bk160)
Black weighting
Bk constant
Constant
copier.
Temp-Inside
Temp-Upper
Temp-Lower
Humidity
Absolute
Humidity
Use this function to show the CCD data.
CLAMP RO RE GO GE BO BE
120mm/s D/A values of clamp
160mm/s R, G, and B at 120
mm/sec.
Lamp Adjust Value
Note
160mm/s Japan Only.
Use this function to check for paper passage through different paper
sources.
Use this function to show the ROM version.
SMP
SCP
Printer
I.P
ADF
Sorter
E-2M
Setting
Machine
Constant
Multi-ve
Stick
B/W Ratio
Copier interior temperature (°C)
Upper Fusing Roller temperature (°C)
Lower Fusing Roller temperature (°C)
Copier interior humidity (%)
Absolute humidity
GAIN
120mm/s
160mm/s
IC73C/IC75C
IC4C
IC2I
S-36
Machine correction
data
∆ Ve value in multi-
copy cycle (V)
Amount of toner
sticking (mg)
Black-to-white ratio (%)
RO RE GO GE BO BE
D/A values of gain R,
G, and B at 120 mm/
sec.