General/Mechanical/Electrical - Minolta CF910 Service Manual

3. General/Mechanical/Electrical

Manual Change List
PAGE
G-1 Laser Radiation Power: 8mW
G-6 Exposure Lamp, Original Scanning, Scanning
Density, Exposure System, Types of
Originals, Maximum Size of Original.
G-7 Warming-up Time After Energy Saver Mode
First Copy Time (Upper Drawer, ×1.000,
Manual Exposure Mode)
Copying Speed for Multi Copy Cycle (Upper
Drawer,
G-8 Zoom Ratios, Void Image Width, Lens, Light
Source, Exposure Lamp, Dimensions.
Options (AFR-12, ADF Kit D, Editor Board,
Editor Display, Mount Kit E, Data Controller
D-102, Plug-in Counter).
G-10 50/60 Hz
G-12 System Options:
2. Plug-in Counter, 3. Duplexing Document
Feeder, 4. Data Controller D-102, 5. Editor
Display, 6. Editor Board.
M-1 IR Unit
M-2, 3 3. Photoelectric Conversion, 4. IR
M-5 Scanner Drive Motor
M-6, 8 Scanner Motor M1, Exposure Lamp LA1,
Scanner Motor M1,
M-11 IR Control Board
M-22 to 41 Chapter 9 Image Reader Section
M-43 IR Digital image data.
M-45 Press Start Key
M-115 Full toner collecting box detection
M-130, 131 IR Control Board PWB-C, Key Counter
CNT12, A/D Converter Board PWB-B, CCD
Sensor Board PWB-A, IR Control Board
PWB-C, DC Power Supply 2 PU2, Exposure
Lamp LA1
M-133 IR Control Board PWB-C
OLD
×
1.000) (Copies/min)
±
0.3%
26.79 µW
Delete
Not applicable
First Print Time (Upper Drawer)
Printing Speed for Multi Print Cycle
(Upper Drawer) (Prints/min)
Delete
50/60 Hz
Delete
Delete
Not applicable
Not applicable
Not applicable
Not applicable
Not applicable
Print digital image data.
Print start signal.
See replacement page 19.
Not applicable
Not applicable
-4-
M: General/Mechanical/Electrical
NEW
±
3 Hz