7
DEVELOPER CHANGE MODE
• This mode is used to adjust and operate the Developing Unit.
NOTE
The Developer mode will only be outlined in this manual. For more details, see DIS/REAS-
SEMBLY, ADJUSTMENT or TROUBLESHOOTING.
7-1.
Developer Change Mode Menu Screen
7-2.
Developer Change Mode Setting Procedure
<Setting Procedure>
1. Turn ON the Power Switch.
2. Open "CF911p" in the menu bar on the PC and click "Dev Mode."
3. Open and close the Front Door.
4. From here on, perform the function according to the instructions on the screen.
Note
The selected function is pops up on the screen.
<Exiting the Mode>
• Click the "Ex." button.
S-47
-22-