Developer Change Mode; Developer Change Mode Menu Screen; Developer Change Mode Setting Procedure - Minolta CF910 Service Manual

7

DEVELOPER CHANGE MODE

• This mode is used to adjust and operate the Developing Unit.
NOTE
The Developer mode will only be outlined in this manual. For more details, see DIS/REAS-
SEMBLY, ADJUSTMENT or TROUBLESHOOTING.
7-1.

Developer Change Mode Menu Screen

7-2.

Developer Change Mode Setting Procedure

<Setting Procedure>
1. Turn OFF the Power Switch and open the Front Door.
2. Turn ON the Power Switch and press the following keys in this order.
→ →
Stop 0
3. With the above menu screen on the Touch Panel, close the Front Door.
4. From here on, perform the function according to the instructions on the screen.
Note
The selected function is highlighted.
<Exiting the Mode>
• Turn OFF, then ON, the Power Switch.
→
Stop 2
S-47
1154S025CA