Paper Take-Up Roller; Electrostatic Charger - Minolta CF2002 User Manual

7.2 Care of the Printer

Paper take-up roller

§ Clean the paper take-up roller by
wiping it with a soft, dry cloth.

Electrostatic charger

If the electrostatic charger is dirty, streaks will appear though the prints. If this
occurs, clean the charger according to the following procedure.
1
Open the front door.
2
Slowly pull out the charger-
cleaning tool as far as possible,
and then slowly push in the
charger-cleaning tool as much as
possible.
Repeat this step three times.
Perform this operation with each
charger-cleaning tool.
3
Securely insert each charger-cleaning tool, and then close the front door.
CF2002/CF3102
7
7-9