Adjustment Of The Sprocket Unit - Minolta CF910 Service Manual

(8) Adjustment of the Sprocket Unit

Fig. 1 Adjustment Procedure
Press the scale against the position shown below and adjust the clearance
between the sprocket unit and copier frame with the adjusting screw.
Adjustment Instructions
If the clearance between the sprocket unit and copier frame is wider than the specifica-
tion, turn the adjusting screw counterclockwise.
If the clearance is narrower than the specification, turn the adjusting screw clockwise.
Adjusting Screw
D-145
Fig. 1
+
27 0.5 mm
0
1154D284AA
1154D279AA