Touch Panel Correction Mode; Touch Panel Correction Mode Screen; Touch Panel Correction Mode Setting/Correcting Procedures - Minolta CF910 Service Manual

8

TOUCH PANEL CORRECTION MODE

• This mode is used to correct the position of keys on the Touch Panel.
8-1.

Touch Panel Correction Mode Screen

1
4
Basic Screen
8-2.

Touch Panel Correction Mode Setting/Correcting Procedures

<Procedure>
1. Press the following keys to enter the Touch Panel Correct mode:
→ →
Stop 0
2. Touch + on screen 1.
3. Touch + on screen 2.
4. Touch + on screen 3.
5. Touch + on screen 4. This completes the automatic correction and the Basic screen
reappears.
Make sure to precisely touch the center of the
1144S009CA
1144S012CA
→
Stop 3
S-50
2
3
+ for each step above.
1144S010CA
1144S011CA