State Confirm (Copier Condition Check - Minolta CF910 Service Manual

Service Mode Menu
Touch Panel Display
VB Shift
AE Adjust

(4) State Confirm (Copier Condition Check)

• This mode is used to check the condition of the copier.
NOTE
The following description only outlines the "State Confirm" functions. For more details, see
TROUBLESHOOTING.
Service Mode Menu
Touch Panel Display
Switch 1 (Paper)
Image Adjust
This function should not be used in the field.
Adjust the AE Reference.
0 1
Less Foggy
Note
AE Center Red, Green, Blue functions should not be set in the field.
State Confirm
Use this function to check the states of sensors along the paper path.
Upr.-Caset Upper Drawer Set
Sensor PC3
Upr.-P.Emp Upper Drawer
Paper Empty Sen-
sor PC6
Upr.-Lift Upper Drawer Lift-
Up Sensor PC9
Upr.-Trans Upper Drawer
Paper Take-Up
Sensor PC12
Mid.-Caset Middle Drawer Set
Sensor PC4
Mid.-P.Emp Middle Drawer
Paper Empty Sen-
sor PC7
Mid.-Lift Middle Drawer Lift-
Up Sensor PC10
Mid.-Trans Middle Drawer Paper
Take-Up Sensor PC13
Lwr.-Caset Lower Drawer Set
Sensor PC5
Lwr.-P.Emp Lower Drawer Paper
Empty Sensor PC8
Note
"On": Blocked "Off": Not Blocked
Setting
2
Setting
Lwr.-Lift
Lwr.-Trans
Mnl.-P.Emp Manual Feed Paper
Front Tim
Adsorb Miss Paper Bonding Fail-
PC. Roll
Sep. Miss
Exit
Front Mid
S-33
3 4
Foggier
Lower Drawer Lift-
Up Sensor PC11
Lower Drawer
Paper Take-Up
Sensor PC14
Empty Sensor PC15
Paper Leading
Edge Detecting
Sensor PC18
ure Detection
Board 1 PWB-01
Paper Bonding Fail-
ure Detection
Board 2 PWB-02
Separating Failure
Detecting Sensor PC21
Paper Exit Switch
S10
Transport Roller
Sensor PC19