Minolta CF910 Service Manual page 204

Hide thumbs Also See for CF910:

Table of Contents

Fig. 2 At Replacement of Tube

1. Insert the syringe into the lower tube

2. Attach the rubber tube from the

3. Attach the tube to the lower end of the

4. Remove the tube and syringe, and

Do not turn any of the knobs, gears or

rollers of the Fusing Unit when the oil tank

is empty. If anything is turned in the unit

when the tank is empty, the pump will lose

its priming oil and may not be able to

pump afterwards.

and draw about 5ml of oil from it.

accessories box to the syringe.

pump and inject the 5ml of oil into it.

plug back in the lower tube of the Oil

Chapters

Table of Contents