Toner Empty Detection Control - Minolta CF910 Service Manual

1154SBM1202A

12-2. Toner Empty Detection Control

The Toner Empty Switches (S5 to 8) are actuated two consecutive times.
The Empty Detection Counter starts to count the ON times of S5 to 8.
When S5 to 8 are actuated 14 times, Near Toner Empty is displayed on the control panel.
S5 to 8 are actuated
two consecutive
times.
Near Toner Empty is displayed on the control panel and a copy cycle is prohibited.
Turn the Power Switch OFF, then
ON.
The toner-empty display is reset.
S5 to 8 are actuated two consecu-
tive times.
Turn the Power
Switch OFF, then ON.
The Near Toner Empty display
disappears.
S5 to 8 are actuated two
consecutive times.
M-66
1144M187CA
Open the Front Door, pull out the
Hopper Unit, replenish toner, and
close the Front Door.
The Near Toner Empty display
disappears.
1144M188CA
Open the Front Door, pull out the
Hopper Unit, replenish toner, and
close the Front Door.
The toner-empty display is reset.