Minolta CF910 Service Manual page 495

FUNCTION OF SWITCHES AND VARIABLE
3
RESISTORS ON PWBs
<Clearing Procedures>
• Open "CF911P" in the menu bar on the PC screen and click "Clear Mode".
1. Turn ON the Power Switch and click the "Trouble Reset" or "Memory Clear" buttons.
2. With the clearing operation activated, turn OFF the Power Switch and, approx. 10 sec.
later, turn ON the Power Switch again.
NOTES
. When memory clear has been performed, make the necessary settings again.
<List of Data Cleared by Trouble Reset and Memory Clear>
Clearing Method
Data Cleared
Misfeed display
Fusing
Malfunction
Fuser Lamp
display
Others
User mode
The "Meter Count" counts
are not cleared.
Following Serviceman Mode
items only:
• Fuser Oil Change
• Count Up Select
• Admin. Mode (access no.)
• RD-Mode
: Cleared –: Not cleared
Front Door Trouble Reset
Open/Close in Clear Mode
–
–
–
S-7, 8
-21-
Memory Clear
in Clear Mode
–
–
–