Minolta CF910 Service Manual page 336

Setting Mode Menu
Touch Panel Display
RD-Mode
Password
Maintenance
DT Setting
CT-ID
DT-ID
TEL. #
Common DT
Setting
Dial Mode
Auto Receive
Result Code
RAM Clear
RD Mode
Setting (the default setting is
Make the initial settings of the copier for the Data Terminal.
Entry of a 7-digit ID code enables making the following settings.
When the ID code is entered and the [OK] key touched after the initial
settings have been made, it executes the transmission of MAINT.
START to the Center.
Used to make the initial settings and various transmissions.
Enter the following data.
Enter the 4-digit ID number of the Center which has been pro-
grammed in the Center personal computer.
Enter the 6-digit ID number of the Data Terminal.
Enter the phone number of the modem connected to the Center per-
sonal computer.
Notes
1. When the office extension and outside line use different systems,
enter "P" for a "pulse" telephone line or "T" for a "tone" telephone
line before the outside line number.
2. According to the type of PBX (private branch exchange) system,
set the time it takes PBX to switch from the extension line to the
outside line.
Fixed: "-" Variable: "W"
Set the following functions.
Select the type of telephone line of the user.
Pulse line
Choose "Yes" or "No" for the auto reception function.
Yes
Note
Select "Yes" if the line is dedicated to the Data Terminal.
Enter the result code used as the confirmation of connection to the
modem when the line is connected.
Reinitializes the Data Terminal.
Yes
Pulse
S-23
Highlighted
)
Tone line
Tone
No
No