Minolta CF2002 User Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. Printer
  5. CF2002
  6. User manual

Minolta CF2002 User Manual

Hide thumbs Also See for CF2002:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual

User Manual

CF2002/3102 Printer
The essentials of imaging

Advertisement

Table of Contents
loading

Related Manuals for Minolta CF2002

Summary of Contents for Minolta CF2002

  • Page 1: User Manual

    User Manual CF2002/3102 Printer The essentials of imaging...
  • Page 3 Welcome Thank you very much for your purchasing of the CF2002/CF3102 Printer. This user manual explains how to operate the printer and replenish its supplies. It also gives some troubleshooting tips as well as general precautions to be observed when operating the printer.

  • Page 4: Table Of Contents

    Installation Site ................2-1 Power Source ................. 2-1 Space Requirements ..............2-2 Operation Precautions ..............2-3 Operating environment ..............2-3 Proper use ..................2-3 Transporting the printer ..............2-4 Care of printer supplies ..............2-4 Storage of prints ................2-5 CF2002/CF3102...
  • Page 5 Loading Paper Into the 1st Drawer ..........4-7 Setting the Paper Size for the 1st Drawer........4-12 Loading Paper Into the 2nd Drawer or a Paper Feed Unit....4-15 Loading Paper Into the Large Capacity Cabinet ......4-17 Loading Paper Into the Manual Bypass Tray ........4-18 CF2002/CF3102...
  • Page 6 When the Message “Near trouble ## / ##” Appears ....5-46 Troubleshooting Improving Print Quality..............6-1 Appendix Specifications ................7-1 Printer CF2002/CF3102 ..............7-1 Duplex Unit AD-14................7-3 Paper Feed Unit PF-118..............7-3 Large Capacity Cabinet PF-121 ............. 7-4 Finisher FN-8 .................. 7-4 Finisher FN-116................
  • Page 7 Using PageScope Light System Requirements ..............8-1 Computer ..................8-1 Access....................8-2 Operation ..................8-2 Screen Configuration..............8-3 Logging in Using the Administrator Mode ........8-5 User Mode..................8-6 System Tab ..................8-6 Print Tab..................8-13 Administrator Mode ..............8-19 System Tab ...................8-19 Print Tab..................8-24 Network Tab..................8-25 Index Index....................9-1 CF2002/CF3102...
  • Page 8 Contents CF2002/CF3102...

  • Page 9: Introduction

    This symbol warns against cause burns. A diagonal line indicates a prohibited course of action. This symbol warns against dismantling the device. A black circle indicates an imperative course of action. This symbol indicates you must unplug the device. CF2002/CF3102...

  • Page 10: Warning

    If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. CF2002/CF3102...

  • Page 11: Caution

    Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. CF2002/CF3102...

  • Page 12: Precautions For Routine Use

    FCC regulations. INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CF2002/CF3102...

  • Page 13: Ce Marking (Declaration Of Conformity) For Users Of The European Union (Eu)

    Acoustic noise (For European Users Only) Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70 dB (A). CF2002/CF3102...

  • Page 14: Explanation Of Manual Conventions

    Text formatted in this style provides additional assistance. § Text formatted in this style describes the action that will ensure the desired results are achieved. [Menu] key The names of keys on the printer panel are written as shown above. CF2002/CF3102...

  • Page 15: Explanation Of Basic Concepts

    During printing, paper is supplied from the right side of the printer and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below. CF2002/CF3102...

  • Page 16: Width" And "Length

    If the width (Y) of the paper is shorter than the length (X), the paper has a vertical or portrait orientation, indicated by “L”. Crosswise If the width (Y) of the paper is longer than the length (X), the paper has a horizontal or landscape orientation, indicated by “C”. CF2002/CF3102...

  • Page 17: Energy Star

    Trademarks and Registered Trademarks DiALTA is a registered trademark of Minolta Co., Ltd. Minolta is a registered trademark of MINOLTA CO., LTD. PageScope is a trademark of MINOLTA CO., LTD. Apple and Macintosh are registered trademarks of Apple Computer, Inc.
  • Page 18 1.5 Trademarks and Registered Trademarks 1-10 CF2002/CF3102...

  • Page 19: Precautions

    Power Source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (AC 127 V areas only: Between –10% and +6%) Frequency fluctuation: Maximum ±0.3% Use a power source with as little voltage or frequency fluctuations as possible. CF2002/CF3102...

  • Page 20: Space Requirements

    56 (1,420) 11-1/4 21-1/4 11-1/4 30-3/4 (780) 50 (1,271) (285) (283) (540) (100) Unit: inch (mm) Note Be sure to allow a clearance of 4 inch (100 mm) or more at the back of the printer for the ventilation duct. CF2002/CF3102...

  • Page 21: Operation Precautions

    Always make sure that the printer’s power plug is visible and not hidden by the printer. Always unplug the printer from the electrical outlet if the unit is not to be used for a long period of time. Always provide good ventilation when making a large number of continuous printer. CF2002/CF3102...

  • Page 22: Transporting The Printer

    Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the printer. Only use toner that has been manufactured specifically for this printer. Never use other types of toner. Keep all supplies out of the reach of children. CF2002/CF3102...

  • Page 23: Storage Of Prints

    Adhesive that contains solvent (e.g., spray glue) may dissolve the toner on prints. Color prints have a thicker layer of toner than normal black-and-white prints. Therefore, when a color print is folded, the toner at the fold may peel off. CF2002/CF3102...
  • Page 24 2.2 Operation Precautions CF2002/CF3102...

  • Page 25: Before Making Prints

    • If the finisher is installed, the printer must be installed on the copy desk, on the large capacity cabinet or over a paper feed unit combined with the copy table. Option Tray JS-100 If finisher FN-116 is installed, the number of paper output trays (optional) can be increased. CF2002/CF3102...
  • Page 26 • The hole-punching function is only available if the optional punch kit (PK-4) is installed onto finisher FN-8. If the finisher is installed, the printer must be installed on the copy desk, on the large capacity cabinet or over a paper feed unit combined with the copy table. CF2002/CF3102...
  • Page 27 Supplemental Table 1 Standard Configuration With Optional Memory Installed With Optional Memory and the Hard Disk Installed Color Black & white Color Black & white Color Black & white 70 sheets 264 sheets 235 sheets 400 sheets Maximum 2,000 sheets CF2002/CF3102...

  • Page 28: Parts Names And Their Functions

    3.2 Parts Names and Their Functions Parts Names and Their Functions Outside of Printer Envelope Plain Plain Thick1 Thick1 Thick2 Thick3 Thick2 Thick3 CF2002/CF3102...
  • Page 29 • Lit: Indicates that the paper is empty 2nd drawer Replenish the paper. Paper-empty indicator Left-side door Opened when servicing the printer Printer power cord socket Used for connecting the printer’s power cord Finisher connector Used for connecting the finisher hookup cord CF2002/CF3102...

  • Page 30: Inside Of Printer

    Used to remove the imaging unit Charger-cleaning tool Used to clean the electrostatic charger wire, for example, when incorrect prints are produced Imaging unit release lever Used to install and replace the imaging unit Toner cartridge Contains a toner cartridge for each color compartments CF2002/CF3102...

  • Page 31: Supplies And Parts

    Collects the ozone generated in the printer Filter Collects the toner dust generated in the printer LED-cleaning tool Used to clean the surface of the LED unit, for example, when replacing the image transfer belt unit Dust remover Collects the dust generated in the printer CF2002/CF3102...

  • Page 32: Options

    Opened when clearing a paper misfeed within the finisher Paper guide Opened when clearing a paper misfeed within the finisher Transport guide Opened when clearing a paper misfeed within the finisher Horizontal transport unit Opened when clearing a paper misfeed within the finisher cover CF2002/CF3102...
  • Page 33 (non-sort tray) setting) Upper cover (FN1) Opened when clearing a paper misfeed within the finisher Horizontal transport unit Opened when clearing a paper misfeed within the finisher cover Option Tray (JS-100) Part Name Description Option Tray (optional) Collects prints CF2002/CF3102...

  • Page 34: Names Of Printer Panel Parts And Their Functions

    Message light • Lights up in red to indicate a communication error lasting more than 30 seconds between the printer controller and the printer • Flashes red if there is a warning or an error that prevents printing 3-10 CF2002/CF3102...

  • Page 35: Selecting The Required Function

    Submenu Print Pages PS Test Page Configuration Job Log Control Panel Map Color Charts PS Font List PCL Font List E-mail Log* Total Counter Unit Check * Appear if e-mail services are enabled in “Service Setup”. Suspend Printing CF2002/CF3102 3-11...

  • Page 36: Engine Setup Items

    Sleep Mode. Life Counter Clear This function is used to reset the Life Counter value of the parts to “0”. Screen Pattern This function is used to select the type of Screen Pattern. 3-12 CF2002/CF3102...

  • Page 37: To Set The Engine Setup Items

    [Set] key. “Login Admin Mode” (login screen for the setting mode used by the technical representative) is displayed. Select “No” and press the [Set] key. Press L or M until the “Low-Power Mode” appears and press the [Set] key. CF2002/CF3102 3-13...
  • Page 38 3.4 Selecting the Required Function Select “On” or “Off” using L or M and press the [Set] key. If “On” is selected, specify the length of time until the printer auotmatically enters the Low-Power Mode. Press the [Set] key. 3-14 CF2002/CF3102...

  • Page 39: Turning The Printer On And Off

    Ready light lights up in green and “Info XXXX” appears in the display. However, a print operation is not performed until the printer has finished warming up (after about 5 minutes at normal room temperature (68 °F/20 °C)). CF2002/CF3102 3-15...

  • Page 40: Turning The Printer Controller On And Off

    [Menu] key in the printer panel. Press L or M until “Functions Shut Down” appears, and then press the [Set] key. Press M once to display “Shut Down System”, and then press the [Set] key to begin shutting down the system. 3-16 CF2002/CF3102...

  • Page 41: To Turn Off The Printer Controller

    If the printer is not used for a while, it automatically enters Energy Saver mode. The printer will automatically start warming up as soon as it receives a print job, or when any cover is opened, then closed. CF2002/CF3102 3-17...

  • Page 42: Total Counter

    [Menu] key in the printer panel. Press L or M until “Function Print Pages” appears, and then press the [Set] key. Press L or M until “Functions Total Counter” appears, and then press the [Set] key. 3-18 CF2002/CF3102...
  • Page 43 3.6 Total Counter The meter counter is printed out. (Refer to page 4-7 for Loading Paper.) CF2002/CF3102 3-19...

  • Page 44: Unit Check

    [Menu] key in the printer panel. Press L or M until “Function Print Pages” appears, and then press the [Set] key. Press L or M until “Functions Unit Check” appears, and then press the [Set] key. 3-20 CF2002/CF3102...
  • Page 45 3.7 Unit Check The life counter is printed out. (Refer to page 4-7 for Loading Paper.) CF2002/CF3102 3-21...
  • Page 46 3.7 Unit Check 3-22 CF2002/CF3102...

  • Page 47: Loading Paper

    Paper Type Overhead Postcards Envelopes Label Sheets Projector Transparen- Paper Source, Etc. cies C Manual bypass tray 1st drawer 2nd drawer — — — — Paper feed unit — — — — Large capacity cabinet — — — — CF2002/CF3102...

  • Page 48: Paper Sizes

    (5.5 in. × (5.5 in. × (A4 C) (B5 L) 8.5 in. C) 8.5 in. L) Paper Source, Etc. (B5 C) (A5 L) Manual bypass tray 1st drawer 2nd drawer Paper feed unit — Large capacity cabinet — — CF2002/CF3102...

  • Page 49: Paper Capacity

    — — — — Paper feed unit — — — — Large capacity cabinet — — — — The paper feed unit and large capacity cabinet are optional. The paper size should be changed by your authorized service representative. CF2002/CF3102...
  • Page 50 Paper that has been decorated with foil or embossing Paper of various sizes Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples or paper clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached CF2002/CF3102...

  • Page 51: Print Area

    Not exposed to direct sunlight Not exposed to a flame Not exposed to high humidity Not extremely dusty Unwrapped paper should be stored in a plastic bag in a cool, dark location. Keep paper out of the reach of children. CF2002/CF3102...

  • Page 52: Automatically Selecting The Paper Source

    Order for selecting another paper drawer When a different paper drawer is automatically selected, the next paper drawer in the following list is chosen. First priority: 2nd drawer Second priority: 3rd drawer Third priority: 4th drawer Fourth priority: 1st drawer CF2002/CF3102...

  • Page 53: Loading Paper

    For paper of a non-standard size, first load the paper, and then adjust the lateral guides to the size of the loaded paper. For “12.25 × 18” (A3 Wide) paper, adjust the trailing-edge guides as shown in the illustration. CF2002/CF3102...
  • Page 54 We recommend replenishing the paper only after all of the paper in the drawer has been used, otherwise a paper misfeed may occur. CF2002/CF3102...
  • Page 55 CF2002/CF3102...
  • Page 56 4.5 Loading Paper Note Do not load envelopes cross- wise, as shown. When loading overhead pro- jector transparencies, load them with the longer side as the leading edge, as shown. Note Do not load overhead projector transparencies lengthwise. 4-10 CF2002/CF3102...
  • Page 57 3 Envelope Envelopes Overhead projector transparencies If postcards are loaded, set the media type selection dial to “Thick2”. If label sheets are loaded, set the media type selection dial to “Thick1”. CF2002/CF3102 4-11...

  • Page 58: Setting The Paper Size For The 1St Drawer

    Press L or M until “Engine Setup” appears, and then press the [Set] key. “Login Admin Mode” (login screen for the setting mode used by the technical representative) is displayed. Select “No” and press the [Set] key. 4-12 CF2002/CF3102...
  • Page 59 [Set] key. Press L or M and select either Auto, Inch, or Metric and press the [Set] key. Press L or M until the desired paper size appears, and then press the [Set] key. CF2002/CF3102 4-13...
  • Page 60 4.5 Loading Paper 4-14 CF2002/CF3102...

  • Page 61: Loading Paper Into The 2Nd Drawer Or A Paper Feed Unit

    Remove the trailing-edge guide, and then re-install it for the size of paper to be loaded. Slide the lateral guides to fit the size of paper to be loaded. CF2002/CF3102 4-15...
  • Page 62 If the paper is not aligned well, a paper mis- feed may occur. We recommend replenishing the paper only after all of the paper in the drawer has been used. Close the paper drawer. 4-16 CF2002/CF3102...

  • Page 63: Loading Paper Into The Large Capacity Cabinet

    Load paper into the left side of the drawer so that the front side of the paper (the side facing up when the package was unwrapped) faces up. Close the paper drawer. CF2002/CF3102 4-17...

  • Page 64: Loading Paper Into The Manual Bypass Tray

    (the blank side) faces down. Prints will be made on the surface of the paper facing down when paper is loaded into the manual bypass tray. 4-18 CF2002/CF3102...
  • Page 65 Load the envelopes with the shorter side as the leading edge and with the side to be printed on facing down, as shown in the illustra- tion. CF2002/CF3102 4-19...
  • Page 66 Note Do not load envelopes cross- wise, as shown. When loading Overhead Pro- jector transparencies, load them with the longer side as the leading edge, as shown. Note Do not load Overhead Projec- tor transparencies lengthwise, as shown. 4-20 CF2002/CF3102...
  • Page 67 Lightly slide the paper into the feed slot as much as possible so that the edge of the paper is fed into the printer. Feed only one sheet of paper at a time. Printing can begin. CF2002/CF3102 4-21...
  • Page 68 4.5 Loading Paper 4-22 CF2002/CF3102...

  • Page 69: Printer Panel Messages

    Load xx-size overhead projector OHP in tray1 transparencies is not loaded into transparencies into tray 1. tray 1. Load xx xx-size thick paper 1 is not Load xx-size thick paper 1 into Thick 1 in tray1 loaded into tray 1. tray 1. CF2002/CF3102...
  • Page 70 Please change Waste toner The waste toner bottle will soon Replace the waste toner bottle as nearly full be full. soon as possible. Waste toner bottle The waste toner bottle is not Install the waste toner bottle. not set installed. CF2002/CF3102...
  • Page 71 The indicated unit will soon reach Replace the indicated unit. (See near life limit the end of its life. p. 5-45.) xxxx unit The indicated unit is not installed. Install the indicated unit. not set CF2002/CF3102...

  • Page 72: When The Message "No Xxxx Toner Please Change" Appears

    § Dispose of the used toner cartridge according to your local regulations. WARNING Handling toner and the toner cartridge § Do not throw toner or the toner cartridge into a fire. Toner expelled from the fire may cause burns. CF2002/CF3102...

  • Page 73: To Replace The Toner Cartridge

    Pull out the empty toner cartridge. Note In order to prevent the used toner cartridge from dirtying anything, keep it in the box. Dispose of the used toner cartridge according to your local regulations. CF2002/CF3102...
  • Page 74 Peel off the tape. Note Slowly remove the tape attached to the toner cartridge. If the tape is removed with too much force, toner may spurt out. CF2002/CF3102...
  • Page 75 Repeat this step three times. Securely insert each charger- cleaning tool, and then close the front door. Note If the door cannot be closed securely, the lever may not be in its correct position. Make sure that the lever is fully turned. CF2002/CF3102...

  • Page 76: When The Message "No Staples" Appears

    Be sure to replace the staple cartridge only after the message appears, otherwise the machine may be damaged. To replace the staple cartridge for FN-116 Slide the finisher away from the printer. Turn the dial to the left in order to position the stapler at the center. CF2002/CF3102...
  • Page 77 5.3 When the Message “No Staples” Appears Pull the staple holder out toward you. Stapler Remove the empty staple cartridge. Insert the new staple cartridge into the staple holder, and then carefully pull out the stopper. CF2002/CF3102...
  • Page 78 5.3 When the Message “No Staples” Appears Insert the refilled staple holder until it locks into place. Slide the finisher back against the printer. 5-10 CF2002/CF3102...

  • Page 79: To Replace The Staple Cartridge For Fn-8

    Be sure to replace the staple cartridge only after the message appears, otherwise the machine may be damaged. Open the front door of the finisher. Turn misfeed-clearing dial clockwise until the removal indicator is completely blue. If the dial is turned too far, turn it counterclockwise to adjust it. CF2002/CF3102 5-11...
  • Page 80 If the dial is turned too far, turn it counterclockwise to adjust it. Grasp both sides of the staple cartridge, lift up the staple cartridge, and then pull it out. 5-12 CF2002/CF3102...
  • Page 81 5.3 When the Message “No Staples” Appears Press the button marked “PUSH” on the side of the staple cartridge. The staple case is released. Pull up the staple case. Remove the paper holder from the staple case. CF2002/CF3102 5-13...
  • Page 82 5.3 When the Message “No Staples” Appears Refill the staple case with staples. Fully insert the staple case as far as possible. Press the staple case down. Peel off the tape from the staples. 5-14 CF2002/CF3102...
  • Page 83 Fully insert the staple cartridge so that it locks into place. Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. CF2002/CF3102 5-15...

  • Page 84: When The Message "Paper Jam At Jx" Appears

    If a paper misfeed or a staple jam occurs during printing, the message shown below appears. Press ▼ once and check where the paper misfeed occured. Follow the procedure below to clear the misfed paper or the jammed staples. 5-16 CF2002/CF3102...

  • Page 85: Codes And Paper Misfeed Locations

    FN-8, front door (p. 5-31) Duplex unit (p. 5-19) finisher FN-8, upper door (p. 5-32) printer, right-side door (p. 5-22) finisher FN-8, transport guide (p. 5-33) printer, image transfer roller (p. 5-23) FN-116, option tray (p. 5-30) CF2002/CF3102 5-17...

  • Page 86: To Clear A Paper Misfeed In The Manual Bypass Tray

    § Be careful not to touch the Image transfer belt surface of the image transfer belt or the image transfer roller. Image transfer roller Carefully pull out the paper. Close the right-side door. 5-18 CF2002/CF3102...

  • Page 87: To Clear A Paper Misfeed In The Duplex Unit

    5.4 When the Message “Paper jam at Jx” Appears To clear a paper misfeed in the duplex unit Open the duplex unit door. Carefully pull out the paper. Close the duplex unit door. CF2002/CF3102 5-19...

  • Page 88: To Clear A Paper Misfeed In The Paper Drawer

    Turn the green wheels to feed the paper so that it can be easily removed. Carefully pull out the paper. Close the lower right-side door. Pull out the paper drawer, and then remove any misfed paper. Close the paper drawer. 5-20 CF2002/CF3102...

  • Page 89: To Clear A Paper Misfeed In The Large Capacity Cabinet

    Carefully pull out the paper. Close the right-side door of the large capacity cabinet. Pull out the paper drawer of the large capacity cabinet, and then remove any misfed paper. Close the paper drawer of the large capacity cabinet. CF2002/CF3102 5-21...

  • Page 90: To Clear A Paper Misfeed Inside The Printer

    Be careful not to touch the surface of the paper take-up roller with your hands. Pull up the lock release lever to open the right-side door. Turn the knob on the inside of the right-side door clockwise to feed out the paper. 5-22 CF2002/CF3102...
  • Page 91 The paper is wrapped around the roller in the image transfer roller. The paper is folded or shredded by the roller in the image transfer roller. The paper that was removed tore and remains in the fusing unit. CF2002/CF3102 5-23...
  • Page 92 Be sure to support the door while carefully opening it, otherwise it may be damaged. While moving the green lever on the inside of the upper right-side door in the direction of the arrow, carefully pull out the paper. 5-24 CF2002/CF3102...
  • Page 93 Grasp the tab on the left end of the fusing unit cover, and then swing the cover toward you to open it. Pull out any paper caught in the fusing unit. CF2002/CF3102 5-25...
  • Page 94 The paper that was removed tore and remains in the fusing unit. Grasp the tab on the left end of the fusing unit cover, and then return the cover to its original position. Close the upper right-side door. Close the right-side door. 5-26 CF2002/CF3102...

  • Page 95: To Clear A Paper Misfeed In Finisher Fn-116

    5.4 When the Message “Paper jam at Jx” Appears To clear a paper misfeed in finisher FN-116 Slide the finisher away from the printer. Open the horizontal transport unit cover, and then remove any paper. Close the horizontal transport unit cover. Open front door FN4. CF2002/CF3102 5-27...
  • Page 96 While holding the misfeed-clearing guide FN7 open, pull out any paper. When the paper can be seen from the print output tray, turn knobs FN5 counterclockwise at the same time to feed out any paper. Close front door FN4. 5-28 CF2002/CF3102...
  • Page 97 While holding misfeed-clearing guide FN2 open, pull out any paper. While holding misfeed-clearing guide FN3 open, pull out any paper. Close upper cover FN1. If the Option tray is not installed, skip to step 16. CF2002/CF3102 5-29...
  • Page 98 5.4 When the Message “Paper jam at Jx” Appears If the Option tray is installed: Open the Option tray. Remove any misfed paper. Close the Option tray. While holding misfeed-clearing guide FN6 open, pull out any paper. Slide the finisher back against the printer. 5-30 CF2002/CF3102...

  • Page 99: To Clear A Paper Misfeed In Finisher Fn-8

    To clear a paper misfeed in finisher FN-8 Slide the finisher away from the printer. Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. Open the front door of the finisher. CF2002/CF3102 5-31...
  • Page 100 Open the upper door of the finisher, and then pull out any paper in the feed section. Close the upper door. Pull out any paper fed into the output tray. 5-32 CF2002/CF3102...
  • Page 101 If the paper could not be removed in step 10, turn the misfeed- clearing dial in the folding section clockwise. Feed the paper into the lower paper output tray, and then pull it out. CF2002/CF3102 5-33...
  • Page 102 5.4 When the Message “Paper jam at Jx” Appears Close the front door of the finisher. Note Be careful that your fingers are not pinched when the front door is closed. Slide the finisher back against the printer. 5-34 CF2002/CF3102...

  • Page 103: To Clear Jammed Staples In Fn-116

    5.4 When the Message “Paper jam at Jx” Appears To clear jammed staples in FN-116 Slide the finisher away from the printer. Turn the dial to the left in order to position the stapler at the center. Pull the staple holder out toward you. Stapler CF2002/CF3102 5-35...
  • Page 104 Move the guide back to its original position. Insert the staple holder until it locks into place. Slide the finisher back against the printer. Note If stapling still cannot be performed, even after performing the above procedure, contact your technical representative. 5-36 CF2002/CF3102...

  • Page 105: To Clear Jammed Staples In Fn-8

    Slide the finisher away from the printer. Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. Open the feed guide for the finisher, and then remove any paper. CF2002/CF3102 5-37...
  • Page 106 Note Be sure to perform these steps. If the paper is pulled out with too much force without performing these steps, the finisher may be damaged. Pull out any paper fed into the output tray. 5-38 CF2002/CF3102...
  • Page 107 Feed out into the lower output tray the paper that could not be fed out in step 8, and then pull out the paper. Slowly pull out the stapler unit as far as possible. CF2002/CF3102 5-39...
  • Page 108 If the dial is turned too far, turn it counterclockwise to adjust it so the cartridge removal indicators are aligned. Grasp both sides of the staple cartridge, lift up the staple cartridge, and then pull it out. Swing open the shutter of the staple cartridge. 5-40 CF2002/CF3102...
  • Page 109 Fully insert the staple cartridge so that it locks into place. Check that the staple cartridge is firmly installed. Carefully move the stapler unit back into its original position. Close the front door. Slide the finisher back against the printer. CF2002/CF3102 5-41...

  • Page 110: When The Message "Punch Dust Full Please Change" Appears

    To empty the hole-punch waste container Empty the hole-punch waste container, and then re-install it according to the following procedure. Slide the finisher away from the printer. Pull out the hole-punch waste container. 5-42 CF2002/CF3102...
  • Page 111 5.5 When the Message “Punch dust full Please change” Appears Empty the container. Insert the hole-punch waste container into its original position. Slide the finisher back against the printer. CF2002/CF3102 5-43...

  • Page 112: When The Message "Service Code Cxxxx" Appears

    When the message shown below appears in the printer panel display, a malfunction has occurred within this printer. Press once and check which error code is displayed. If this message appears, contact your technical representative and inform them of the error code that is indicated. 5-44 CF2002/CF3102...

  • Page 113: When The Message "Xxxx Unit Near Life Limit" Appears

    If this message appears, replace the unit according to your maintenance agreement. Disposing of Used Parts Dispose of used units according to your local regulations, or contact your technical representative. CF2002/CF3102 5-45...

  • Page 114: When The Message "Near Trouble ## / ##" Appears

    When the message shown below appears in the printer panel display, image stabilization and printing functions for the printer have become unstable. Press once and check which error code is displayed. If this message appears, contact your technical representative and inform them of the error coad that is indicated. 5-46 CF2002/CF3102...

  • Page 115: Troubleshooting

    Partial void image The paper loaded in the tray is Replace the old paper with damp. fresh dry paper. p. 4-7 The imaging unit requires Contact your technical replacement. representative. The image transfer belt unit requires replacement. CF2002/CF3102...
  • Page 116 The electrostatic charger is Clean the electrostatic charger. dirty. p. 7-9 Soiled back side The printer’s internal paper path Run several prints to flush out is dirty. the debris. Blurred background The imaging unit requires Contact your technical replacement. representative. CF2002/CF3102...
  • Page 117 If you do not want to use this prints. Saver mode when the print mode, disable it. command was issued. See “Engine Setup Items” on page 3-12. The printer setting was for color Wait a few moments. transparency (transparency sheet) or thick paper printing. CF2002/CF3102...
  • Page 118 6.1 Improving Print Quality CF2002/CF3102...

  • Page 119: Appendix

    7.1 Specifications 7 Appendix Specifications Printer CF2002/CF3102 Specification Type Desktop Platen Stationary Photo conductor Printing system Dry-type electrophotographic method Developing system MTHG developing method Fusing system Belt-fixing Scanning: 600 dpi, Printing: 600 dpi × 1800 dpi equivalent Resolution Paper types Plain paper (17 to 24 lbs.
  • Page 120 Rear edge: 0.2 inch (5 mm) Font edge: 0.2 inch (5 mm) First print Full color: Less than 14.1 seconds (CF2002) Black: Less than 7.9 seconds (for Letter C or A4 C paper loaded into the 1st drawer) First print Full color: Less than 9.9 seconds...

  • Page 121: Duplex Unit Ad-14

    500 sheets (21-1/4 lbs. or 80 g/m Power requirements Supplied by printer Power consumption Less than 15 W Dimensions W: 21 in. (535 mm) D: 22-1/4 in. (568 mm) H: 5 in. (127 mm) Weight About 18-3/4 lbs. (8.5 kg) CF2002/CF3102...

  • Page 122: Large Capacity Cabinet Pf-121

    210 to 256 g/m ), postcards, envelopes, label sheets, overhead projector transparencies “Sort” and “Sort”/“Staple” settings: Plain paper (17 to 24 lbs. or 64 to 90 g/m Lower paper output tray: Plain paper (17 to 24 lbs. or 64 to 90 g/m CF2002/CF3102...
  • Page 123 Less than 65 W Dimensions W: 23-3/4 in. (601 mm) D: 23-3/4 in. (603 mm) H: 36-3/4 in. (933 mm) Weight About 91-3/4 lbs. (41.6 kg) (including the horizontal transport unit) Accessories 1 staple cartridge (5,000 staples for 50 sheets) CF2002/CF3102...

  • Page 124: Finisher Fn-116

    Power consumption Less than 63 W Dimensions W: 21-1/4 in. (538 mm) D: 25 in. (637 mm) H: 38-1/2 in. (978 mm) Weight About 84 lbs. (38.1 kg) (including the horizontal transport unit) Accessories 1 staple cartridge (3,000 staples) CF2002/CF3102...

  • Page 125: Option Tray Js-100

    A4 L/C, A3 L Paper capacity Letter C (A4 C): 100 sheets, Except Letter C (A4 C): 50 sheets Dimensions W: 13-1/2 in. (341 mm) D: 20-3/4 in. (527 mm) H: 5-3/4 in. (149 mm) Weight About 3-3/4 lbs. (1.75 kg) CF2002/CF3102...

  • Page 126: Care Of The Printer

    § Clean the printer panel by wiping it with a soft, dry cloth. Note Pressing too hard on the printer panel may damage them. In addition, never use mild household detergent or glass cleaner to clean the printer panel. CF2002/CF3102...

  • Page 127: Paper Take-Up Roller

    Repeat this step three times. Perform this operation with each charger-cleaning tool. Securely insert each charger-cleaning tool, and then close the front door. CF2002/CF3102...

  • Page 128: Consumables

    Note Only use toner that has been manufactured specifically for this printer. Do not throw away the used toner cartridges. Instead, keep them in their boxes to be collected by your service representative. 7-10 CF2002/CF3102...

  • Page 129: Staple Cartridges

    7.3 Consumables Staple Cartridges FN-116 Staples for staple binding 3,000 staples are provided in the staple cartridge. FN-8 Staples for staple binding 5,000 staples are provided in the staple cartridge. CF2002/CF3102 7-11...
  • Page 130 7.3 Consumables 7-12 CF2002/CF3102...

  • Page 131: Using Pagescope Light

    Windows XP Internet Explorer 6 or higher, Netscape Navigator 4 or higher MacOS 9.x Internet Explorer 4.5 or higher Netscape Navigator 4 or higher MacOS X Internet Explorer 5.1 or higher Netscape Navigator 4 or higher Ethernet TCP/IP protocol CF2002/CF3102...

  • Page 132: Access

    PageScope Light operation is identical to that for Internet Web pages. You can click a link on the Web page to jump to the link destination or click the [Back] or [Forward] button to display the previous or next page. CF2002/CF3102...

  • Page 133: Screen Configuration

    If you wish to change the display language of PageScope Light, log into the Administrator Mode, and change the setting using the “Preference” menu. Minolta PageScope Light Logo Click the Minolta logo to jump to the following Web site. www.minolta.com Click the PageScope Light logo to jump to the following Web site.
  • Page 134 Selects the information or setup item to be displayed. The menus that appear vary depending on the tab selection. For details on each menu, see the following sections. Information and Setting Details Displays the details of the selected menu. WebTools Moves to the Fiery WebTools screen. CF2002/CF3102...

  • Page 135: Logging In Using The Administrator Mode

    Enter the administrator password into the “Admin Password” box at the upper left corner of the screen. Click [Log-in] to log in using the Administrator Mode. To log out, click [Log-out]. Note Contact the printer administrator for the password. CF2002/CF3102...

  • Page 136: User Mode

    [Summary] menu on the [System] tab. The Summary screen shows the current printer system configuration and status. Device Status: Shows the configuration of options installed on the printer using graphics. Installation Status of Options: Shows the overview of the system configuration of the printer. CF2002/CF3102...
  • Page 137 Size of paper loaded in the tray Media Type: Type of media loaded in the tray Orientation: Orientation of paper loaded in the tray Capacity: Maximum number of sheets that can be loaded in the tray Paper: Amount of paper remaining in the tray CF2002/CF3102...
  • Page 138 It shows the configuration of all the output trays installed on the printer. Tray: Option tray name (When FN-116 is installed) First Tray, Elevator Tray, Third Tray (When FN-8 is installed) Elevator Tray, Saddle Tray Capacity: Maximum number of A4/Letter-size sheets the tray can hold Paper: Tray status CF2002/CF3102...
  • Page 139 This screen appears when you click the [Printer HDD] sub-menu under the [Detail] menu. It shows the status of the hard disk installed on the printer controller. Total: Size of the installed hard disk Used: Amount of hard disk space used by the system Remain: Amount of free hard disk space CF2002/CF3102...
  • Page 140 8.4 User Mode Consumables This screen appears when you click the [Consumables] sub-menu under the [Detail] menu. It shows the current status of consumables of the printer and the option units 8-10 CF2002/CF3102...
  • Page 141 8.4 User Mode Counter This screen appears when you click the [Counter] menu on the [System] tab. It shows various counter values that the printer manages. CF2002/CF3102 8-11...
  • Page 142 8.4 User Mode Online Assistance This screen appears when you click the [Online Assistance] menu on the [System] tab. It shows information concerning product support. The information can be edited in the Administrator Mode. (See p. 8-21.) 8-12 CF2002/CF3102...

  • Page 143: Print Tab

    Settings: 1 to 999 [Apply] button: Click the button to apply the new settings. [Clear] button: Click the button to clear the settings that were entered or selected. CF2002/CF3102 8-13...
  • Page 144 Font Number: Enter the font number. [Apply] button: Click the button to apply the new settings. [Clear] button: Click the button to clear the settings that were entered or selected. 8-14 CF2002/CF3102...
  • Page 145 “Yes” to print. If “No” is selected, the data being processed by the RIP and the details of the error are not printed, but the pages that have been processed by the RIP is printed. Settings: No or Yes CF2002/CF3102 8-15...
  • Page 146 It shows a list of PCL fonts and PostScript fonts that are built into the printer controller. PCL Font This screen appears when you click the [PCL Fonts] sub-menu under the [Font Information] menu. It shows a list of PCL fonts that are built into the printer controller. 8-16 CF2002/CF3102...
  • Page 147 8.4 User Mode PostScript Font This screen appears when you click the [PostScript Fonts] sub-menu under the [Font Information] menu. It shows a list of PostScript fonts that are built into the printer controller. CF2002/CF3102 8-17...
  • Page 148 8.4 User Mode Print Pages This screen appears when you click the [Print Pages] menu on the [Print] tab. The screen is used to select the test page to be printed and execute the printing. 8-18 CF2002/CF3102...

  • Page 149: Administrator Mode

    Settings: 30 to 7200 sec. Display Language: Sets the display language of PageScope Light. [Apply] button: Click the button to apply the new settings. [Clear] button: Click the button to clear the settings that were entered or selected. CF2002/CF3102 8-19...
  • Page 150 8.5 Administrator Mode ROM Version This screen appears when you click the [ROM Version] menu on the [System] tab. It shows the ROM version of the printer, the firmware version of the controller, and other information. 8-20 CF2002/CF3102...
  • Page 151 8.5 Administrator Mode Online Assistance This screen appears when you click the [Online Assistance] menu on the [System] tab. You can use the screen to enter information concerning product support. CF2002/CF3102 8-21...
  • Page 152 [Maintenance] menu. You can use the screen to restart the printer controller. Printer Controller/[Restart] Restarts the printer controller. Click the [Restart] button to show button: a screen used to confirm whether to execute the restart operation. Click the [Yes] button on the confirmation screen to restart the printer controller. 8-22 CF2002/CF3102...
  • Page 153 Resets the printer controller settings to factory default. Click the button: [Restore] button to show a screen used to confirm whether to execute the initialization. Click the [Yes] button on the confirmation screen to reset the printer controller settings to factory default. CF2002/CF3102 8-23...

  • Page 154: Print Tab

    Displays the setting selected under “Enable Parallel Port” in the Setup mode of the printer controller. I/O Timeout: Enter the wait time (second(s)) that is used to determine the completion of the job after the data received through the parallel port stops. 8-24 CF2002/CF3102...

  • Page 155: Network Tab

    This screen appears when you click the [Summary] menu on the [Network] tab. It shows a summary of the printer controller interface (TCP/IP settings). Device Type: Interface type IP Address: IP address of the printer controller MAC Address: MAC address of the printer controller CF2002/CF3102 8-25...
  • Page 156 8.5 Administrator Mode 8-26 CF2002/CF3102...

  • Page 157: Index

    Auto paper source selection ..............4-6 Care of the printer ................7-8 Charger-cleaning tool ..............3-6 Copy desk ....................3-1 Copy table ...................3-2 Duplex unit ................... 3-2 Duplex unit door ..................3-8 Dust remover ..................3-7 Filter .....................3-7 Finisher FN-116 ................... 3-1 FN-8 ..................3-2 CF2002/CF3102...
  • Page 158 2nd drawer .................. 4-15 large capacity cabinet ..............4-17 manual bypass tray ..............4-18 Lower paper output tray ..............3-8 Lower right-side door ................3-5 Manual bypass tray ................3-5 Media type selection dial ..............3-5 Memory ....................3-3 CF2002/CF3102...
  • Page 159 Power source ..................2-1 Power switch ................3-5 3-16 Primary paper output tray ..............3-9 Print area .....................4-5 Print output tray ...................3-5 Printer controller ..................3-1 Printer panel ................3-5 3-10 Cancel key ...................3-10 Menu key ..................3-10 Message light ................3-10 Message window .................3-10 CF2002/CF3102...
  • Page 160 FN-8 .................... 5-11 Staple cartridges ................7-11 Staple jam clearing FN-116 ..................5-35 FN-8 .................... 5-37 Toner cartridge ................3-7 7-10 Toner cartridge compartments ............3-6 Toner cartridge replacement ............... 5-5 Total counter ..................3-18 Transport guide ................... 3-8 Troubleshooting .................. 6-1 CF2002/CF3102...
  • Page 161 9.1 Index Upper cover ..................3-9 Upper door ...................3-8 Upper right-side door ................3-6 User mode Print tab ..................8-13 System tab ..................8-6 Waste-toner bottle ................3-7 CF2002/CF3102...
  • Page 162 9.1 Index CF2002/CF3102...

This manual is also suitable for:

Cf3102

Table of Contents